首页> 东莞市万田新材料科技有限公司> 产品展示> 双组份视窗玻璃油墨

最后更新时间: 2019/11/11 2:31:03

价格 电议
发货地 广东-东莞
型号 GFAA
总量 10000
最小起订量 1

手机扫码查看

询价

询价

您当前询价的产品是:

双组份视窗玻璃油墨

*询价内容:
*联系人:
先生 女士
*联系电话:

*验证码:       看不清,刷新

双组份视窗玻璃油墨

Vantan GFAA系列双组份视窗玻璃油墨 series two-component window glass printing ink

高硬度 高附着力 高遮盖耐化学溶剂

high hardness      high adhesion     high coverage       chemical solvent resistance

油墨特性 Characteristic :

Vantan  GFAA 系列是一款溶剂型双组份玻璃丝印油墨。附着力强、硬度高、耐酸耐碱、耐酒精、耐二甲苯、耐丁酮、耐水煮水泡。中等光泽、色泽饱满、流平性优异、印刷平整无**、遮盖佳,一次印刷就可达到非常好的遮盖力,大大节省成本。

Vantan  GFAA series is a solvent-based two-component glass screen printing ink, with strong adhesion, high rigidity, acid and alkali resistant, alcohol resistant, xylene resistant, butanone resistant, boiling and soaking resistant. Medium gloss, full color, excellent levelling property, smooth printing without pinhole, good coverage, and can get good coverage just in one printing, saving a c**iderable amount of costs.

适用范围 Applied range:

适合印刷刚化玻璃、强化玻璃、应用于手机盖板、显示器视窗等面板行业。

Suitable for printing on stalinite, tempered glass, used in panel industry such as mobile phone cover and display window.
Method of use:

使用方法Method of use :

印刷前请清洗印刷表面并过烘干机烘干玻璃。

clean the printing surface and dry the glass with drier before printing.

固化剂和烘烤条件:添加P527固化剂;油墨:固化剂=100;10;烘烤150度,10-30分钟。

Curing agent and drying conditi**: add P527 curing agent; printing ink : curing agent=100:10; dry at 150℃ for 10 to 30 minutes.

稀释剂:根据印刷方式和环境条件添加10%左右稀释剂调节油墨稀稠度。

Diluent: add about 10% diluent to adjust the c**istence of the printing ink according to the printing method and environmental conditi**. 

添加本公司不同的固化剂可得到不同的墨层性能,具体使用请咨询本公司技术人员。

You can get different ink layer performance by adding different curing agent of our company, please c**ult technical staff of our company for specific use.
Be careful:

注意事项

玻璃清洗后必须烘干玻璃,潮湿天尽量避免施工。

Dry the glass after cleaning, try to avoid the operation in wet weather.

功能测试(如:耐化学测试、水煮、水泡等)必须在油墨充分固化并放置24小时后进行。

Function test (e.g. chemical resistance test, boiling resistance test, soaking resistance test and so on) should be performed after the printing ink is fully solidified and rested for 24 hours.

已添加固化剂的油墨必须在规定的时间内使用完,并不得收回至原包装内。

The printing ink with curing agent should be used up within the specific

time and shall not be recycled to the original package.



联系方式

占先生

13360682508

东莞市万田新材料科技有限公司

电话:+86-0769-82621228

邮箱:wantianyoumo@163.com

网址:https://wantian.jqw.com/

地址:广东省东莞市石排镇石排大道燕窝村康联达工贸中心A栋7楼

供应商信息

东莞市万田新材料科技有限公司

公司简介 Company introduction:万田油墨技术源于油墨技术**的德国,2003年进入中国市场,在东莞成立东莞市万田涂料科技有限公司,作为万田油墨在国内的营运研发和营运中心;并在全国设立5个办事处;惠州市富林化工有......
查看更多
企业类型 私营有限责任公司 经营模式 生产加工
注册资本 100万人民币 员工人数 50-100
企业注册地 广东-东莞 经营方向 销售
成立时间 2002 主营行业 精细化学品-油墨-玻璃油墨
主要经营地点 广东省东莞市石排镇石排大道西路康联达工贸中心
主营产品或服务 免处理PP丝印油墨,耐酒精PP丝印油墨,PVA丝印油墨,金属玻璃丝印油墨,PS塑胶丝印油墨,尼龙丝印油墨

双组份视窗玻璃油墨 相关产品推荐

内容声明: 金泉网为第三方互联网信息服务提供者,金泉网平台内所展现的商品及服务的标题、价格、详情等信息内容均为商铺网站所有者发布,其真实性、准确性和合法性均由商铺网站所有者负责。金泉网不参与用户间交易行为,您在购买商品/服务前请务必谨慎核实;金泉网平台存在海量商铺网站,如您发现商铺网站内有任何违法/侵权信息,请立即向金泉网举报并提供有效线索。举报专线:4006-575-585/0595-86723222