MAVOLOG PRO
Class A Power Disturbance Analyzer per IEC 61000-4-30
The MAVOLOG PRO power disturbance analyzer has been designed for continuous monitoring of the mains in accordance with mains quality standard EN 50160.
Highly flexible parameters configuration allows for adaptation to other standards, as well as for use in general power and c**umption measurements.
The instrument is capable of simultaneously logging and evaluating disturbances, as well as more than 140 quantities.
The MAVOLOG PRO power disturbance analyzer is also equipped with additional analog as well as digital inputs and outputs to which sensors (e.g. temperature sensors, anemometers and pressure sensors) and I/O modules such as rate meters can be connected.
Thanks to the large auto-range for voltage, the instrument is not only suitable for low-voltage levels, but rather for the medium and high voltage ranges as well via transformer.
Main features:
4 current and 4 voltage measuring inputs with auto-ranging
Up to 20 additional inputs and outputs possible
Can be used in railway, power and onboard electrical systems (16 to 400 Hz)
High resolution of the voltage and current measuring inputs - 32 kHz / channel
Spectral analysis in accordance with EN 61000-4-7 up to the 63rd harmonic
Acquisition of 10 user-defined sub-harmonics
Interfaces: Ethernet, USB, RS 232, RS 485
Communication protocols: TCP/IP, Modbus and DNP3
Expanded flicker measurement per EN 61000-4-15 for various voltage levels
Time synchronization via GPS or NTP
The MAVOLOG PRO power disturbance analyzer has been designed for continuous monitoring of the mains in accordance with mains quality standard EN 50160.
Highly flexible parameters configuration allows for adaptation to other standards, as well as for use in general power and c**umption measurements.
The instrument is capable of simultaneously logging and evaluating disturbances, as well as more than 140 quantities.
The MAVOLOG PRO power disturbance analyzer is also equipped with additional analog as well as digital inputs and outputs to which sensors (e.g. temperature sensors, anemometers and pressure sensors) and I/O modules such as rate meters can be connected.
Thanks to the large auto-range for voltage, the instrument is not only suitable for low-voltage levels, but rather for the medium and high voltage ranges as well via transformer.
Main features:
4 current and 4 voltage measuring inputs with auto-ranging
Up to 20 additional inputs and outputs possible
Can be used in railway, power and onboard electrical systems (16 to 400 Hz)
High resolution of the voltage and current measuring inputs - 32 kHz / channel
Spectral analysis in accordance with EN 61000-4-7 up to the 63rd harmonic
Acquisition of 10 user-defined sub-harmonics
Interfaces: Ethernet, USB, RS 232, RS 485
Communication protocols: TCP/IP, Modbus and DNP3
Expanded flicker measurement per EN 61000-4-15 for various voltage levels
Time synchronization via GPS or NTP
