Flupac European Standard Equipment
福尔湃克拥有数台目前欧洲**的液压设备来确保高品质的工程安装，同时可以提供和租赁各式各样的机器，并可安排专业人员为客户进行机器使用的培训，专门用来进行管路的预制和安装，以满足不同领域客户的需求。对于大型项目，公司还提供成套的、可移动集装箱式的工作站，站内同时配备了所有必需的机器设备。
A quality installation will require many different preparation equipments; these are available for rent or Flupac can sell. Flupac will offer full training for all these equipments.
我们的冲洗流量能从20升/分钟达到2000升/分钟，福尔湃克拥有数台不同的冲洗站，高压能达到350公斤及以上，低压则为20公斤。福尔湃克冲洗标准按照雷诺兹4000标准，并选择恰当的机器及流量来达到不同要求。
Our Flushing capability ranges from 20LPM up to 2000LPM, We have different flushing rigs which will flush at high pressure or 350Bar or low pressure of 20 Bar. Flupac will flush to a Reynolds 4000 standard and choose the correct equipment and flow rate to meet the criteria.
所有的清洁度测试都是运用激光颗粒计数器连线进行的，该计数器是必须通过ISO4406标准AC尘粒测试校正过的。可打印NAS等级或ISO等级的测试记录，也可直接将记录下载到电脑里。
Particle counting is by means of a laser Particle Count Machine calibrated against AC fine test Dust to ISO 4406. Print out is available in NAS class or ISO. This can also be downloaded for a computer.
福尔湃克永远只使用校正后的压力表进行压力测试。
Calibrated against a DWT by always utilize calibrated pressure gauges for pressure testing authority.
福尔湃克目前拥有的进口机器包括：
European standard equipments include:
扩口机 Flaring Machine
管端成型机 Walform Machine
弯管机 Bending Machine
锯床 Tube cutting machine
去毛刺机 Deburring Machine
冲洗站 Flushing Rig (60LPM、200LPM、1500LPM、2000LPM)
滤油器 Oil purifier
颗粒计数器 Particle Counting Machine
清洁** Jet Clean Machine
压力测试台 Pressure Test Machine
软管剥皮机 Hose Skive Machine
软管切割机 Hose Cutting Machine
软管扣压机 Hose crimping Machine
软管刻字机 Hose label tap machine
集装箱式工作站 Containerized workshop (20ft、35ft、40ft)
